The continuous rise of raw materials, the continuous increase of labor costs, the rapid growth of land prices, and the increasing value of the renminbi have set up layers of roadblocks for the development of domestic printing companies. Faced with the severe test of survival, many printing companies have set their sights on the development and use of new technologies, and hot stamping, sublimation transfer digital printing and silicone printing have also gained more and more because of their own characteristics and adaptability to the market. The more attention.
1. High-efficiency and low-risk hot stamping traditional printing process is complicated, the production efficiency is low, and the production risk is large, a little negligence will cause a big mistake, resulting in thousands of products scrapped, time-consuming and labor-intensive Say it's still consuming.
Compared with traditional printing, the hot stamping process can completely overcome the above problems:
First of all, the production efficiency of the hot stamping process can be more than twice that of traditional printing. Mr. Yan Chufeng, the head of Capitas Clothing and Crafts Co., Ltd. said: "With the printing process, we can complete the printing of 30,000 products per day, while using hot stamping The process can complete 80,000 pieces per day. "
Secondly, the products printed by the hot stamping process are much better in quality than printing. It is understood that many foreign customers are very optimistic about the hot stamping process. They feel that it is important to keep a garment from consumers until they do n’t wear it. Therefore, when they choose a domestic printing company for product processing, Will take the initiative to request the hot stamping process, even for a few letters.
In addition, compared with traditional printing, the products of the hot stamping process also have the characteristics of thin ink layer and good feel, so they are favored by many companies. Although there is also an unsatisfactory place in the hot stamping process, the cost of hot stamping of a single product is higher than that of traditional printing, but the author believes that this does not affect the development of the hot stamping process.
2. The effect of sublimation transfer digital printing suitable for industrial and commercial production and market development have always been a stumbling block to the development of the digital printing industry. Although digital printing technology has made great progress in recent years, he still has not been able to fundamentally solve its It is not suitable for the disadvantages of mass production, so it still has a clear boundary with traditional screen printing. However, the popularity of sublimation transfer digital printing seems to have found an entry point for the development of digital printing.
Sublimation transfer digital printing is a type of printing that uses thermal transfer ink to pass through an inkjet printer, mainly a piezoelectric inkjet printer, which is first sprayed onto paper and then heated to 180 degrees to transfer the pattern to the fabric Craftsmanship. The effect of sublimation transfer digital printing is very good, after printing, the pattern will not be blurred due to ink drift, and it has the characteristics of bright color, washing and light fastness.
In the past year, China's thermal transfer ink market has developed rapidly, and the product market price is low, making large-scale digital printing no longer expensive, thus laying a solid foundation for the sublimation of digital printing in large-scale industrial and commercial popularity.
Third, the environmental protection technology silicone (silicon) printing silicone printing process itself is not much different from the traditional screen printing, but the materials used are different. Silicone printing mainly uses silicone instead of glue to print textiles, but because silicone is non-toxic and harmless to the environment, silicone printing is considered an ultra-environmental printing process.
The products printed with silicone have strong three-dimensional impression after printing, soft touch, good brightness and wear resistance, and are environmentally friendly and non-toxic, which can increase the added value of the product, but because of its higher cost, it is currently only used by large and medium-sized enterprises.

Patch Fitting

Patch fitting

Our Patch Fittings assemblies offer the perfect solution for functional and esthetic Commercial Glass Door setups, which is made of attractive polished / satin finished stainless steel cover and specially formulated Aluminum Alloy base bodies to optimize safety and durability.


1. Cover Material: Stainless Steel

2. Body material: Aluminum alloy

3. Finish: Mirror / Matt

4. Suitable for glass door width: 800-1000mm

5. Suitable for glass thickness: 8-10mm

6. Must be tempered glass

Patch Fitting,Glass Door Fittings,Glass Patch Fittings,Glass Door Accessories

Jiangyi Industrial Co., Ltd ,